User Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
linux [2021/03/27 07:01]
78.46.204.118 old revision restored (2016/04/29 09:40)
linux [2021/03/28 11:40] (current)
65.21.61.121 old revision restored (2017/08/23 01:55)
Line 1: Line 1:
-====== Linux ====== +On Linux, you can quickly install Photonic3D with the following commands:
-If you are experienced with Linux, you can quickly install Photonic3D with the following commands:+
  
 Latest stable: Latest stable:
  
-sudo wget https://github.com/area515/Creation-Workshop-Host/raw/master/host/bin/start.sh+<code> 
 +sudo wget -O start.sh https://github.com/area515/Photonic3D/raw/master/host/bin/start.sh
 sudo chmod 777 start.sh sudo chmod 777 start.sh
 sudo ./start.sh sudo ./start.sh
 +</code>
 Latest development: Latest development:
- +<code> 
-sudo wget https://github.com/WesGilster/Creation-Workshop-Host/raw/master/host/bin/start.sh+sudo wget -O start.sh https://github.com/WesGilster/Photonic3D/raw/master/host/bin/start.sh
 sudo chmod 777 start.sh sudo chmod 777 start.sh
-sudo ./start.sh WesGilster +sudo ./start.sh WesGilster/Photonic3D 
 +</code>
 Photonic3D will be installed into /opt/cwh and an init script will be added to /etc/init.d to launch the server on boot. Photonic3D will be installed into /opt/cwh and an init script will be added to /etc/init.d to launch the server on boot.